Config Authen Application; Show Authen Application - D-Link DGS-1210/ME Series Reference Manual

DGS-1210-28MP/ME:5# disable authen_policy
Command: disable authen_policy
Success.
DGS-1210-28MP/ME:5#

config authen application

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the default method list for the command line interface:
DGS-1210-28MP/ME:5# config authen application http login default
Command: config authen application http login default
Success.
DGS-1210-28MP/ME:5#

show authen application

Purpose
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
To configure various applications on the Switch for authentication
using a previously configured method list.
config authen application {console | http | ssh | telnet | all]
[login | enable] [default | method_list_name <string 15>]
The config authen application command configures Switch
applications (console, Telnet, SSH) for login at the user level and at
the administration level (authen_enable), utilizing a previously
configured method list.
application – Specifies the application to configure. One of the
following four options may be selected:
•
console – Configures the command line interface login
method.
•
http – Configures the http login method.
•
ssh – Configures the Secure Shell login method.
•
telnet – Configures the telnet login methods.
•
all – Configures all applications as (console, Telnet, SSH)
login methods.
login – Configures an application for normal login on the user level,
using a previously configured method list.
enable – Configures an application for upgrading a normal user level
to administrator privileges, using a previously configured method list.
default – Configures an application for user authentication using the
default method list.
method_list_name <string 15> – Configures an application for user
authentication using a previously configured method_list_name.
Only Administrator-level users can issue this command.
To display authentication methods for the various applications on the
Switch.
444