COMMANDS DETAILS
STANDARD COMMAND DETAILS
HT
[Name]
Horizontal tab
ASCII
[Format]
Hex.
Decimal 9
[Range]
N/A
Moves print position to next horizontal tab position.
This command is ignored if the next tab is not set.
If the next tab position exceeds the print region, the print position is moved
The horizontal tab position is set by ESC D (Set/cancel horizontal tab
[Description]
When the print position is at the [print region + 1] position and this
The initial value of the horizontal tab position is every 8 characters of Font
LF
[Name]
Print and line feed
ASCII
[Format]
Hex.
Decimal 10
[Range]
N/A
Prints the data in the print buffer and performs a line feed based on the set line
[Description]
feed amount.
After execution, makes the top of the line the next print starting position.
FF
[Name]
Print and recover to standard mode (in page mode)
ASCII
[Format]
Hex.
Decimal 12
[Range]
N/A
Prints all buffered data to the print region collectively, then recovers to the standard
[Description]
mode.
PA-3222 SERIES USER MANUAL
HT
09
to [print region + 1].
position).
command is received, the current line buffer full is printed and a horizontal
tab is executed from the top of the next line.
A (the 9th, 17th, 25th positions, etc.)
LF
0A
FF
0C
Chapter 4 Software Utilities
Page: 4-14