4.9.1.2
OPOS Printer Driver
The MB1030_OposSetup.exe program sets up the registry information of MSRHK
reader for OPOS program uses.
1.
Installation
The steps below guide you to install the MB1030_OposSetup program.
•
Run the setup file MB1030_OposSetup.exe located in the Software folder of the
DVD.
•
This setup also installs the MB1030 program.
•
Follow the wizard instructions to complete the installation.
2.
Launching the Program
Follow the steps below to load the MB1030 program:
•
Click the POSPrinter folder from the path: Start\Programs\Protech OPOS.
•
Click MB1030 to launch the program.
PA-3222 SERIES USER MANUAL
Chapter 4 Software Utilities
Page: 4-55