ESC S
[Name]
Select standard mode
ASCII ESC S
[Format]
Hex. 1B 53
Decimal 27 83
[Range]
N/A
Valid only when input by page mode.
All buffer data in page mode is deleted.
Sets the print position to the beginning of the next line after execution.
The print area set by ESC W (Set print region in page mode) is reset to the
This command switches the settings for the following commands the values
[Description]
The following commands are effective only when in standard mode.
The following commands are ignored in standard mode.
Standard mode is selected when the power is turned on, the printer is reset or
PA-3222 SERIES USER MANUAL
16
User Define
default setting.
of which can be set independently in standard mode and page mode to those
for standard mode
a. ESC SP :Set character right space amount
b. FS S :Set Chinese character space amount
c. ESC 2 :Set default line spacing
d. ESC 3 :Set line spacing
a. ESC W :Set print region in page mode
b. ESC T :Select character print direction in page mode
a.
GS $ :Specify absolute position for character vertical direction in page
Mode
b.
GS \: :Specify relative position for character vertical direction in page
mode
initialized (ESC @).
Chapter 4 Software Utilities
Page: 4-26