Opos Driver - Protech Systems PA-3222 User Manual

4.9.2.2

OPOS Driver

The MB4000_OposSetup.exe program sets up the registry information and example
program of VFD for OPOS program uses.
1. Installation
The steps below guide you to install the MB4000_OposSetup program:
•
Run the MB4000_OposSetup setup file
•
This setup also installs the Prox-PMP4000 program.
•
Follow the onscreen wizard instructions to complete the installation.
2. Launching the Program
The steps below guide you to load the Prox-PMP4000 program:
•
Click the LineDisplay folder from the path: Start/Programs/Protech OPOS.
•
Click Prox-PMP4000 to launch the program.
PA-3222 SERIES USER MANUAL
Chapter 4 Software Utilities
Page: 4-64