Protech Systems PA-3222 User Manual page 104

ESC ! n
[Name] Select print mode(s).
ASCII
[Format] Hex.
Decimal
0 ≤ n ≤ 255
[Range]
Initial Value n = 0
This command selects print mode(s) with bits having following meanings.
Bit
0
1
2
3
[Description]
4
5
6
7
ESC $ nL nH
[Name] Set absolute print position.
ASCII
[Format] Hex.
Decimal
0 ≤ (nL + nH x 256) ≤ 65535 (0 ≤ nH ≤ 255, 0 ≤ nL ≤ 255)
[Range]
This command specifies the next print starting position in reference to the left
edge of the print area. The printing start position is calculated using (nL + nH x
[Description]
256) x (vertical or horizontal motion units). Specifications exceeding the print
range are ignored.
PA-3222 SERIES USER MANUAL
ESC ! n
1B 21 n
27 33 n
On / Off Hex Decimal
Off 00
On 01
Off 00
Off 00
Off 00
On 08
Off 00
On 10
Off 00
On 20
Off 00
Off 00
On 80
ESC $ nL nH
1B 24 nL nH
27 36 nL nH
Chapter 4 Software Utilities
0 Character font A selected.
1 Character font B selected.
0 Not used. Fixed to Off.
0 Not used. Fixed to Off.
0 Emphasized mode not selected.
8 Emphasized mode selected.
0 Double-height mode not selected
16 Double-height mode selected
0 Double-width mode not selected.
32 Double-width mode selected.
0 Not used. Fixed to Off.
0 Underline mode not selected.
128 Underline mode selected.
Function
Page: 4-19