Protech Systems PA-3222 User Manual page 103

DLE DC4 n m t
[Name] Real-time output of specified pulse.
ASCII
[Format] Hex.
Decimal
n = 1
[Range] m = 0,1
1 ≤ t ≤ 8
This outputs a signal specified by t to the connector pin specified by m.
m = 0: #2 Pin of the drawer kick connector
[Description]
m = 1: #5 Pin of the drawer kick connector
On time is set to t x 100 msec; Off time is set to t x 100 msec.
ESC FF
[Name] Print data in page mode.
ASCII
[Format] Hex.
Decimal
[Range] N/A
Prints all buffered data in the print area collectively in page mode.
 This command is enabled only in page mode.
 Holds the following information after printing.
[Description]
ESC SP n
[Name] Set right-side character spacing.
ASCII
[Format] Hex.
Decimal
0 ≤ n ≤ 255
[Range]
Initial Value n = 0
This command sets the size of space to right of character.
[Description]
Right space = n × [horizontal motion units].
PA-3222 SERIES USER MANUAL
DLE DC4 n m t
10 14
16 20
ESC FF
1B 0C
27 12
a. Expanded data
b. Character print direction selection in page mode (ESC T)
c. Set print region (ESC W) in the page mode.
d. Character expansion position
ESC SP
1B 20
27 32
Chapter 4 Software Utilities
n m t
n m t
n
n
n
Page: 4-18