Protech Systems PA-3222 User Manual page 114

ESC \ nL nH
[Name] Set relative print position.
ASCII
[Format] Hex.
Decimal
0 ≤ (nL + nH x 256) ≤ 65535 (0 ≤ nL 255, 0 ≤ nH ≤ 255)
[Range]
Specifies the next print starting position with a relative position based on the
current position. This sets the position from the current position to [(nL + nH x
[Description]
256) x basic calculated pitch] for the next print starting position.
ESC a n
[Name] Select justification.
ASCII
[Format] Hex.
Decimal
0 ≤ n ≤2
[Range]
Initial Value n = 0
This command specifies position alignment for all data in one line in
standard mode, using n as follows:
[Description]
This command has no effect in page mode.
PA-3222 SERIES USER MANUAL
ESC \
1B 5C
27 92
 Specifications exceeding the print range are ignored..
ESC a n
1B 61
27 97
n Alignment
0 Left alignment
1 Center alignment
2 Right alignment
Chapter 4 Software Utilities
nL nH
nL nH
nL nH
n
n
Page: 4-29