Protech Systems PA-3222 User Manual page 98

Two-dimensional Bar Code Commands
Control Hexadecimal
Codes Code
<DC2 ;> 12 3B
<GS p 1> 1D 70 01
Kanji Control Commands
(when the Japanese, Simplified Chinese, Traditional Chinese, or Korean model is
used.)
Control Hexadecimal
Codes Codes
<FS !> 1C 21
<FS &> 1C 26
<FS -> 1C 2D
<FS .> 1C 2E
<FS S> 1C 53
<FS W> 1C 57
Command classification
Executing : Printer executes the command which does not affect the following data.
Setting: Printer uses flags to make settings, and those settings affect the following data.
○: Enabled.
◎: Enabled only when the command is set at the beginning of a line.
●: Enabled only when data is not present in the printer buffer.
▲: Only value setting is possible.
Disabled: Parameters are processed as printable data.
Ignored: All command codes including parameters are ignored and nothing is executed.
PA-3222 SERIES USER MANUAL
Function
Specifies a module size of QR Code and
Data Matrix
Prints QR Code data based on the
specified contents
Function
Set print mode(s) for Kanji characters
Select Kanji character mode
Turn underline mode on/off for Kanji
characters
Cancel Kanji character mode
Set Kanji character spacing
Turn quadruple-size mode on/off for Kanji
characters
Chapter 4 Software Utilities
Standard
Mode
V
V
Standard
Mode
V
V
V
V
V
V
Page: 4-13
Page
Mode
V
V
Page
Mode
V
V
V
V
V
V