Protech Systems PA-3222 User Manual page 164

Configuration of OPOS MSR Register program
3.
a.) Main screen buttons/items:
Button/Item
Control Object
Service Object
Service Object
Reg
 Unreg
Exit
b.) Follow the steps below to register the MSRHK OPOS information:
Step 1: Select an item in the Service Object List box from the left pane. Make
sure the correct item is selected.
Step 2: Click Reg button
Step 3: In the OPOS MSR Setting screen, enter the device name and click
OK.
PA-3222 SERIES USER MANUAL
(Check box) Register the OPOSMSR.ocx common
control object driver. The item needs to be checked to run
the OPOS MSR Tester program.
(Left pane) The Service Object driver types. So far only
four driver types are supported. Each driver type supports
specific MSR readers. Please refer to the OPOS MSR
Service Object and Method Relations section for details.
(Right pane) The registered MSR with the specified
device name.
Create a new device name for the selected MSR.
Remove the selected device name from the registry.
Quit the program.
Chapter 4 Software Utilities
Description
Page: 4-79