Protech Systems PA-3222 User Manual page 118

ESC { n
[Name] Turns upside-down printing mode on/off.
ASCII
[Format] Hex.
Decimal
0 ≤ n ≤ 255
[Range]
Initial Value n = 0
Specifies or cancels upside-down printing.
 Cancels upside-down printing when n = <*******0>H.
 Specifies upside-down printing when n = <*******1>H.
 n is effective only when it is the lowest bit.
 This command is effective only when input at the top of the line when
[Description]
 This command has no effect in page mode. In page mode, this command is
 Upside-down printing rotates line data 180 degrees.
FS p n m
[Name] Print NV bit image.
ASCII
[Format] Hex.
Decimal
1 ≤ n ≤ 255
[Range]
0 ≤ m ≤ 3, 48 ≤ m ≤ 51
Prints NV bit image n using mode m.
[Description]
 n specifies the NV bit image number.
 m specifies the bit-image mode.
 NV bit image is a bit image defined in non-volatile memory by FS q and
 This command is ignored when the specified NV bit image n is undefined.
PA-3222 SERIES USER MANUAL
ESC {
1B 7B
27 123
standard mode is being used.
only effective for the setting.
n
0
1
FS p
1C 70
28 112
m
0, 48
1, 49
2, 50
3, 51
printed by this command.
Chapter 4 Software Utilities
n
n
n
Upside-down mode
Turned off
Turned on
n m
n m
n m
Mode
Normal
Double-width
Double-height
Quadruple
Page: 4-33