Installing Wireless Module Driver Utility (Optional) - Protech Systems PA-3222 User Manual

5
Follow the on-screen instructions to complete the installation.
6
Once the installation is completed, shut down the system and
restart PA-3222 for the changes to take effect.

4.8 Installing Wireless Module Driver Utility (Optional)

The wireless driver utility can only be installed on POSReady 7 &
®
Windows 8.1 & Windows
after the OS installation.
To install the wireless driver, follow the steps below:
1
Connect the USB DVD-ROM device to PA-3222 and insert the
driver disk.
Enter the "Device\Embedded Wireless Module" folder where the
2
wireless driver is located.
3
Click Setup.exe file for driver installation.
4
Follow the on-screen instructions to complete the installation.
5
Once the installation is completed, shut down the system and
restart PA-3222 for the changes to take effect.
PA-3222 SERIES USER MANUAL
®
10 series, and it should be installed right
Chapter 4 Software Utilities
Page: 4-8