Finding Feature Information - Cisco Catalyst 2960 series Configuration Manual

Managing Switch Stacks
•
•
•
•
•
•
•
•
•

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest caveats and
feature information, see Bug Search Tool and the release notes for your platform and software release. To
find information about the features documented in this module, and to see a list of the releases in which each
feature is supported, see the feature information table at the end of this module.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not
required.
Prerequisites for Switch Stacks
All stack members must run the same Cisco IOS software image to ensure compatibility among stack members.
For switch stack hardware considerations, see the Catalyst 2960-X Switch Hardware Installation Guide.
Finding Feature Information, page 717
Prerequisites for Switch Stacks, page 717
Restrictions for Switch Stacks, page 718
Information About Switch Stacks, page 718
How to Configure a Switch Stack, page 733
Troubleshooting the Switch Stack, page 741
Monitoring the Switch Stack, page 743
Configuration Examples for Switch Stacks, page 744
Additional References for Switch Stacks, page 747
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
31
C H A P T E R
717