Enabling An Initial Configuration For Cisco Ios Cns Agent - Cisco Catalyst 2960 series Configuration Manual

How to Configure the Configuration Engine
Command or Action
Step 5
end
Example:
Switch(config)# end
Step 6 show running-config
Example:
Switch# show running-config
Step 7 copy running-config startup-config
Example:
Switch# copy running-config startup-config
Step 8 Start the Cisco IOS CNS agent on the switch.
What to Do Next
You can now use the Cisco Configuration Engine to remotely send incremental configurations to the switch.
Related Topics
Cisco IOS CNS Agents, on page 412

Enabling an Initial Configuration for Cisco IOS CNS Agent

Follow these steps to enable the CNS configuration agent and initiate an initial configuration on the switch.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
418
Purpose
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration file.