Configuring Aaa Server Group Selection Based On Dnis - Cisco Catalyst 2960 series Configuration Manual

Information About TACACS+
Cause Description 11.0
Codes
1911 - This code no
Q850 is used to
Protocol report a
Error protocol
error event
only when
no other
code in the
protocol
error class
applies.
This code
applies to
ISDN or
modem
calls that
have come
in over
ISDN.
1927 - There has no
Q850 been an
Unspecified error when
Internetworking interworking
Event with a
network
that does
not provide
codes for
actions that
it takes.
This code
applies to
ISDN or
modem
calls that
have come
in over
ISDN.

Configuring AAA Server Group Selection Based on DNIS

Cisco software allows you to authenticate users to a particular AAA server group based on the Dialed Number
Identification Service (DNIS) number of the session. Any phone line (a regular home phone or a commercial
T1/PRI line) can be associated with several phone numbers. The DNIS number identifies the number that was
called to reach you.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
880
11.1 11.2 11.3
no no no
no no no
12.0 12.1 12.2
no no no
no no no
12.3
yes
yes