Monitoring Cns Configurations - Cisco Catalyst 2960 series Configuration Manual

To disable the Cisco IOS agent, use the no cns config partial { ip-address | hostname } global configuration
command. To cancel a partial configuration, use the cns config cancel global configuration command.
Related Topics
Incremental (Partial) Configuration, on page 413
Monitoring CNS Configurations, on page 427

Monitoring CNS Configurations

Table 44: CNS show Commands
Command
show cns config connections
Switch# show cns config connections
show cns config outstanding
Switch# show cns config outstanding
show cns config stats
Switch# show cns config stats
show cns event connections
Switch# show cns event connections
show cns event gateway
Switch# show cns event gateway
show cns event stats
Switch# show cns event stats
show cns event subject
Switch# show cns event subject
Related Topics
Enabling a Partial Configuration for Cisco IOS CNS Agent, on page 425
Incremental (Partial) Configuration, on page 413
Enabling an Initial Configuration for Cisco IOS CNS Agent, on page 418
Initial Configuration, on page 412
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
Monitoring CNS Configurations
Purpose
Displays the status of the CNS Cisco IOS CNS agent
connections.
Displays information about incremental (partial) CNS
configurations that have started but are not yet
completed.
Displays statistics about the Cisco IOS CNS agent.
Displays the status of the CNS event agent
connections.
Displays the event gateway information for your
switch.
Displays statistics about the CNS event agent.
Displays a list of event agent subjects that are
subscribed to by applications.
427