Consolidated Platform Configuration Guide, Cisco Ios Release 15.2(4)E (Catalyst 2960-X Switches - Cisco Catalyst 2960 series Configuration Manual

Number Vendor-Specific
Company Code
26 9
26 9
26 9
26 9
26 9
26 9
26 9

Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)

Sub-Type Number Attribute
1 l2tp-cm-local-window-size
1 l2tp-drop-out-of-order
1 l2tp-hello-interval
1 l2tp-hidden-avp
1 l2tp-nosession-timeout
1 tunnel-tos-reflect
1 l2tp-tunnel-authen
Information about RADIUS
Description
Specifies the maximum
receive window size for
L2TP control messages.
This value is advertised to
the peer during tunnel
establishment.
Respects sequence
numbers on data packets
by dropping those that are
received out of order. This
does not ensure that
sequence numbers will be
sent on data packets, just
how to handle them if they
are received.
Specifies the number of
seconds for the hello
keepalive interval. Hello
packets are sent when no
data has been sent on a
tunnel for the number of
seconds configured here.
When enabled, sensitive
AVPs in L2TP control
messages are scrambled or
hidden.
Specifies the number of
seconds that a tunnel will
stay active with no
sessions before timing out
and shutting down.
Copies the IP ToS field
from the IP header of each
payload packet to the IP
header of the tunnel packet
for packets entering the
tunnel at the LNS.
If this attribute is set, it
performs L2TP tunnel
authentication.
909