Using Modular Qos Cli; Finding Feature Information; Information About Mqc - Cisco Nexus 7000 Series Configuration Manual

Using Modular QoS CLI

This chapter describes how to configure Modular QoS CLI (MQC) objects that can be used for configuring
QoS features using the Cisco NX-OS software.
•
•
•
•
•
•
•
•
•
•

Finding Feature Information

Your software release might not support all the features documented in this module. For the latest caveats
and feature information, see the Bug Search Tool at
for your software release. To find information about the features documented in this module, and to see a list
of the releases in which each feature is supported, see the "New and Changed Information"chapter or the
Feature History table in this chapter.

Information About MQC

MQC provides a language to define QoS policies.
For more information about MQC commands, see the Cisco Nexus 7000 Series NX-OS Quality of Service
Command Reference.
You configure QoS policies by following these three steps:
1. Define traffic classes.
2. Associate policies and actions with each traffic class.
3. Attach policies to logical or physical interfaces and VLANs.
Finding Feature Information, on page 9
Information About MQC, on page 9
Licensing Requirements, on page 10
Using an MQC Object, on page 11
Configuring an MQC Object, on page 18
Applying Descriptions to MQC Objects, on page 22
Verifying an MQC Object, on page 23
Attaching and Detaching a QoS Policy Action, on page 23
Session Manager Support for QoS, on page 26
Feature History for Using Modular QoS CLI, on page 26
C H A P T E R
https://tools.cisco.com/bugsearch/
Cisco Nexus 7000 Series NX-OS Quality of Service Configuration Guide
3
and the release notes
9