Configuring Username And Password Pairs - Cisco Catalyst 2960 series Configuration Manual

Command or Action
Step 5
end
Example:
Switch(config-line)# end
Step 6
show running-config
Example:
Switch# show running-config
Step 7 copy running-config startup-config
Example:
Switch# copy running-config
startup-config
Related Topics
Preventing Unauthorized Access, on page 753
Terminal Line Telnet Configuration, on page 757
Example: Setting a Telnet Password for a Terminal Line, on page 772

Configuring Username and Password Pairs

Follow these steps to configure username and password pairs:
Purpose
spaces but ignores leading spaces. By default, no password is
defined.
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration file.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
How to Control Switch Access with Passwords and Privilege Levels
765