Configuring Persistence With Auto-Lag - Cisco Catalyst 2960 series Configuration Manual

Command or Action
Step 5
end
Example:
Switch(config-if)# end
Step 6 show etherchannel auto
Example:
Switch# show etherchannel auto
What to Do Next
Related Topics
Configuring Auto-LAG Globally, on page 355
Auto-LAG, on page 341
Auto-LAG Configuration Guidelines, on page 342
Configuring Persistence with Auto-LAG, on page 357
Configuring Auto LAG: Examples, on page 360

Configuring Persistence with Auto-LAG

You use the persistence command to convert the auto created EtherChannel into a manual one and allow you
to add configuration on the existing EtherChannel.
SUMMARY STEPS
1. enable
2. port-channel channel-number persistent
3. show etherchannel summary
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Switch> enable
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
Purpose
Returns to privileged EXEC mode.
Displays that EtherChannel is created automatically.
Purpose
Enables privileged EXEC mode. Enter your password if
prompted.
How to Configure EtherChannels
357