Configuring Vrrs Accounting - Cisco Catalyst 2960 series Configuration Manual

DETAILED STEPS
Command or Action
Step 1
Device (config)# aaa session-mib disconnect

Configuring VRRS Accounting

Perform the following task to configure Virtual Router Redundancy Service (VRRS) to send AAA Accounting
messages to the AAA server:
SUMMARY STEPS
1. enable
2. configure terminal
3. aaa accounting vrrs {default | list-name} start-stop method1 [method2...]
4. aaa attribute list list-name
5. attribute type name value [service service] [protocol protocol][mandatory][tag tag-value]
6. exit
7. vrrs vrrs-group-name
8. accounting delay seconds
9. accounting method {default | accounting-method-list}
10. end
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2 configure terminal
Example:
Device# configure terminal
Step 3
aaa accounting vrrs {default | list-name} start-stop
method1 [method2...]
Purpose
Monitors and terminates authenticated client connections using SNMP.
To terminate the call, the disconnect keyword must be used.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
How to Configure Accounting
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Enables AAA accounting for VRRS.
1025