Consolidated Platform Configuration Guide, Cisco Ios Release 15.2(4)E (Catalyst 2960-X Switches - Cisco Catalyst 2960 series Configuration Manual

Cause Code
65
66
67
100
101
102
120
150
151
152
160
170
180
185
190
195
600
601
Value
TCP-Host-Unreachable
TCP-Network-Admin Unreachable
TCP-Port-Unreachable
Session-Timeout
Session-Failed-Security
Session-End-Callback
Invalid-Protocol
RADIUS-Disconnect
Local-Admin-Disconnect
SNMP-Disconnect
V110-Retries
PPP-Authentication-Timeout
Local-Hangup
Remote-Hangup
T1-Quiesced
Call-Duration
VPN-User-Disconnect
VPN-Carrier-Loss

Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)

Information about RADIUS
Description
TCP host is unreachable.
TCP network is unreachable for
administrative reasons.
TCP port in unreachable.
Session timed out.
Session failed for security reasons.
Session terminated due to callback.
Call refused because the detected protocol
is disabled.
Disconnected by RADIUS request.
Administrative disconnect.
Disconnected by SNMP request.
Allowed V.110 retries have been exceeded.
PPP authentication timed out.
Disconnected by local hangup.
Disconnected by remote end hangup.
Disconnected because T1 line was
quiesced.
Disconnected because the maximum
duration of the call was exceeded.
Call disconnected by client (through PPP).
Code is sent if the LNS receives a PPP
terminate request from the client.
Loss of carrier. This can be the result of a
physical line going dead.
Code is sent when a client is unable to dial
out using a dialer.
921