How to Configure a Switch Stack
Command or Action
Step 6
copy running-config startup-config
Example:
Switch# copy running-config
startup-config
Setting the Stack Port Speed to 10 Gbps
In a mixed stack of Catalyst 2960-X and 2960-S switches, you must set the stack port speed to 10 Gbps. This
task is required in a mixed stack configuration and must be run on a Catalyst 2960-X switch in the switch
stack before you add a 2960-S switch to the stack. Otherwise, the switches will not stack.
SUMMARY STEPS
1. configure terminal
2. switch stack port-speed 10
3. end
4. copy running-config startup-config
5. reload
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Switch# configure terminal
Step 2
switch stack port-speed 10
Example:
Switch(config)# switch stack port-speed 10
Step 3
end
Example:
Switch(config)# end
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
738
Purpose
(Optional) Saves your entries in the configuration file.
Purpose
Enters global configuration mode.
Sets the stack port speed to 10 Gbps.
Returns to privileged EXEC mode.