Restrictions For Aaa-Server-Mib Set Operation - Cisco Catalyst 2960 series Configuration Manual

Restrictions for AAA-SERVER-MIB Set Operation

Restrictions for AAA-SERVER-MIB Set Operation
Currently, the CISCO SNMP set operation is supported only for the RADIUS protocol. Therefore, only
RADIUS servers in global configuration mode can be added, modified, or deleted.
Information About AAA-SERVER-MIB Set Operation
CISCO-AAA-SERVER-MIB
The CISCO-AAA-SERVER-MIB provides that statistics reflect both the state of the AAA server operation
with the server itself and of AAA communications with external servers. The CISCO-AAA-SERVER-MIB
provides the following information:
• Statistics for each AAA operation
• Status of servers that are providing AAA functions
• Identities of external AAA servers
CISCO-AAA-SERVER-MIB Set Operation
Before Cisco IOS Release 12.4(4)T, the CISCO-AAA-SERVER-MIB supported only the "get" operation.
Effective with this release, the CISCO-AAA-SERVER-MIB supports the set operation. With the set operation,
you can do the following:
• Create or add a new AAA server.
• Modify the KEY under the CISCO-AAA-SERVER-MIB. This "secret key" is used for secure connectivity
• Delete the AAA server configuration.
How to Configure AAA-SERVER-MIB Set Operation
Configuring AAA-SERVER-MIB Set Operations
No special configuration is required for this feature. The Simple Network Management Protocol (SNMP)
framework can be used to manage MIBs. See the Additional References section for a reference to configuring
SNMP.
Verifying SNMP Values
SNMP values can be verified by performing the following steps.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1064
to the AAA server, which is present with the network access server (NAS) and the AAA server.