Allocating Bandwidth Between The Ingress Queues - Cisco Catalyst 2960 series Configuration Manual

How to Configure QoS
Command or Action
Step 5
copy running-config startup-config
Example:
Switch# copy-running-config startup-config
Related Topics
Queueing and Scheduling on Ingress Queues, on page 556
Examples: Configuring Ingress Queue Characteristics, on page 639

Allocating Bandwidth Between the Ingress Queues

You need to specify how much of the available bandwidth is allocated between the ingress queues. The ratio
of the weights is the ratio of the frequency in which the SRR scheduler sends packets from each queue. The
bandwidth and the buffer allocation control how much data can be buffered before packets are dropped. On
ingress queues, SRR operates only in shared mode.
Note SRR bandwidth limit works in both mls qos enabled and disabled states.
Beginning in privileged EXEC mode, follow these steps to allocate bandwidth between the ingress queues.
This procedure is optional.
SUMMARY STEPS
1. configure terminal
2. mls qos srr-queue input bandwidth weight1 weight2
3. end
4. Use one of the following:
5. copy running-config startup-config
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
616
• show mls qos interface queueing
• show mls qos input-queue
Purpose
(Optional) Saves your entries in the configuration file.
To return to the default setting, use the no mls qos srr-queue
input buffers global configuration command.