Specifying The Security Violation Mode - Cisco Catalyst 2960 series Configuration Manual

Command or Action
Step 10
end
Example:
Device(config-if)# end

Specifying the Security Violation Mode

When there is a security violation on a port, the port can be shut down or traffic can be restricted. By default,
the port is shut down. You can configure the period of time for which the port is shut down.
SUMMARY STEPS
1. enable
2. configure terminal
3. interface type slot / port
4. switchport
5. switchport mode
6. authentication port-control auto
7. mab [eap]
8. authentication violation {restrict | shutdown}
9. authentication timer restart seconds
10. end
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Device> enable
Step 2
configure terminal
Example:
Device# configure terminal
access
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
How to Configure MAC Authentication Bypass
Purpose
Exits interface configuration mode and returns to
privileged EXEC mode.
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
1047