Configuring Auto-Qos - Cisco Catalyst 2960 series Configuration Manual

Configuring Auto-QoS

•
•
•
•
•
•
•
•
•
•
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest caveats and
feature information, see Bug Search Tool and the release notes for your platform and software release. To
find information about the features documented in this module, and to see a list of the releases in which each
feature is supported, see the feature information table at the end of this module.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not
required.
Prerequisites for Auto-QoS
Before configuring standard QoS or auto-QoS, you must have a thorough understanding of these items:
• The types of applications used and the traffic patterns on your network.
• Traffic characteristics and needs of your network. Is the traffic bursty? Do you need to reserve bandwidth
Finding Feature Information, page 645
Prerequisites for Auto-QoS, page 645
Restrictions for Auto-QoS, page 646
Information about Configuring Auto-QoS, page 646
How to Configure Auto-QoS, page 651
Monitoring Auto-QoS, page 655
Configuration Examples for Auto-Qos, page 655
Where to Go Next for Auto-QoS, page 665
Additional References for Auto-QoS, page 665
Feature History and Information for Auto-QoS, page 666
for voice and video streams?
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
28
C H A P T E R
645