Consolidated Platform Configuration Guide, Cisco Ios Release 15.2(4)E (Catalyst 2960-X Switches - Cisco Catalyst 2960 series Configuration Manual

How to Configure Optional Spanning-Tree Features
SUMMARY STEPS
1. enable
2. configure terminal
3. spanning-tree portfast edge bpdufilter default
4. interface interface-id
5. spanning-tree portfast edge
6. end
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Switch> enable
Step 2 configure terminal
Example:
Switch# configure terminal
Step 3
spanning-tree portfast edge bpdufilter default
Example:
Switch(config)# spanning-tree portfast edge
bpdufilter default
Step 4
interface interface-id
Example:
Switch(config)# interface gigabitethernet1/0/2
Step 5
spanning-tree portfast edge
Example:
Switch(config-if)# spanning-tree portfast edge
Step 6
end
Example:
Switch(config-if)# end

Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)

306
Purpose
Enables privileged EXEC mode. Enter your password
if prompted.
Enters the global configuration mode.
Globally enables BPDU filtering.
By default, BPDU filtering is disabled.
Specifies the interface connected to an end station, and
enters interface configuration mode.
Enables the PortFast edge feature on the specified
interface.
Returns to privileged EXEC mode.