How To Configure Qos - Cisco Catalyst 2960 series Configuration Manual

How to Configure QoS

Enabling QoS Globally
By default, QoS is disabled on the switch.
The following procedure to enable QoS globally is required.
SUMMARY STEPS
1. configure terminal
2. mls qos
3. end
4. show mls qos
5. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1 configure terminal
Example:
Switch# configure terminal
Step 2
mls qos
Example:
Switch(config)# mls qos
Step 3 end
Example:
Switch(config)# end
Step 4
show mls qos
Example:
Switch# show mls qos
Step 5 copy running-config startup-config
Example:
Switch# copy running-config
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
Purpose
Enters global configuration mode.
Enables QoS globally.
QoS operates with the default settings described in the related
topic sections below.
To disable QoS, use the no mls qos global
Note
configuration command.
Returns to privileged EXEC mode.
Verifies the QoS configuration.
(Optional) Saves your entries in the configuration file.
How to Configure QoS
571