Monitoring Standard Qos - Cisco Catalyst 2960 series Configuration Manual

Monitoring Standard QoS

Command or Action
Step 4
end
Example:
Switch(config-if)# end
Step 5 show mls qos interface [interface-id] queueing
Example:
Switch# show mls qos interface
interface_id queueing
Step 6 copy running-config startup-config
Example:
Switch# copy-running-config
startup-config
Related Topics
Queueing and Scheduling on Egress Queues
Examples: Configuring Egress Queue Characteristics, on page 640
Monitoring Standard QoS
Table 73: Commands for Monitoring Standard QoS on the Switch
Command
show class-map [class-map-name]
show mls qos
show mls qos aggregate-policer
[aggregate-policer-name]
show mls qos interface [interface-id] [buffers |
policers | queueing | statistics]
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
630
Purpose
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration file.
To return to the default setting, use the no srr-queue
bandwidth limit interface configuration command.
Description
Displays QoS class maps, which define the match
criteria to classify traffic.
Displays global QoS configuration information.
Displays the aggregate policer configuration.
Displays QoS information at the port level, including
the buffer allocation, which ports have configured
policers, the queueing strategy, and the ingress and
egress statistics.