How to Configure IPv6 MLD Snooping
Command or Action
Step 3
end
Example:
Switch(config)# end
Step 4
show ipv6 mld snooping mrouter [ vlan vlan-id ]
Example:
Switch# show ipv6 mld snooping mrouter vlan 1
Enabling MLD Immediate Leave (CLI)
Beginning in privileged EXEC mode, follow these steps to enable MLDv1 Immediate Leave:
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Switch# configure terminal
Step 2
ipv6 mld snooping vlan vlan-id immediate-leave
Example:
Switch(config)# ipv6 mld snooping vlan 1
immediate-leave
Step 3
end
Example:
Switch(config)# end
Step 4
show ipv6 mld snooping vlan vlan-id
Example:
Switch# show ipv6 mld snooping vlan 1
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
178
Purpose
Returns to privileged EXEC mode.
Verifies that IPv6 MLD snooping is enabled on the VLAN
interface.
Purpose
Enters global configuration mode.
Enables MLD Immediate Leave on the VLAN
interface.
Returns to privileged EXEC mode.
Verifies that Immediate Leave is enabled on the
VLAN interface.