Main Assembly 7; Adjustment Roller Shaft Holder Assembly - Epson TM-U200 series Technical Manual

C o n fid e n tia l

Main Assembly 7

Adjustment roller shaft holder assembly

1. Attach the adjustment roller shaft holders to the carriage shaft as shown in the illustration.
2. Push the adjustment roller shaft holders and turn them 90 degrees in the direction of arrow
C. The A portion points straight down.
Check that the adjustment roller shaft holders click into place.
5-18 Disassembly, Assembly, and Adjustment
Adjustment roller
shaft holder
Adjustment roller
shaft holder
Carriage shaft
Carriage shaft
Portion A
C
Rev. A