Table of Contents
Advertisement
30 November, 1999
Printer Switch 03
No
FUNCTION
0
Reduce the length of received
data
0: Disabled
1: Enabled
1-3 Not used
4
Page separation threshold (with reduction disabled in switch 03 bit 0 above)
to
If the incoming page is up to x mm longer than the copy paper, the excess portion
will not print. If the incoming page is more than x mm longer than the copy paper,
7
the excess portion will print on the next page.
These four bits determine the value of x.
Hex value of bits 4 to 7
0
1
and so on until
F
Cross-reference
Page separation and data reduction: section 2-2-12
Length reduction On/Off: Printer Switch 03, Bit 0
COMMENTS
0: Incoming pages are printed without length
reduction.
Cross-reference
Page separation threshold: Printer Switch. 03,
bits 4 to 7.
1: Incoming pages are reduced in the
lengthwise direction when printing.
Cross-reference
Reduction ratio: Printer Switches 04/05
Page separation and data reduction: section 2-
2-12
Do not change these settings.
x (mm)
0
1
15
4-23
BIT SWITCHES
Advertisement
Table of Contents
