Download Print this page
Hide thumbs Also See for FAX 2900Li:

Advertisement

Quick Links

Before You
Use This
Machine
Before you can send or receive fax messages,
please take about 30 minutes to set up your machine.
Set up your machine as in the following procedures.
Keep going...

Advertisement

loading

Summary of Contents for Ricoh FAX 2900Li

  • Page 1 Before You Use This Machine Before you can send or receive fax messages, please take about 30 minutes to set up your machine. Set up your machine as in the following procedures. Keep going...
  • Page 2: Toner Cassette

    Installing the Prepare the toner cassette. Press down on the cassette until it locks Toner Cassette into place. Important TDo not touch the green drum. Note TIf you do not push the cassette right in, the cover 1. Remove the toner cassette from its bag. will not close.
  • Page 3 Installing the Attaching the Set the paper then lower the cassette Main Paper Quick Dial Sheet cover. Note Cassette And Operation T The frosted side of the cover must be face up when closed. Panel Sheet Unpack the cassette. Peel off the 3 pieces of tape from the cassette cover.
  • Page 4: Attaching The Trays And Docu- Ment Table

    Attaching the Attach the Document Delivery Tray. If necessary, pull out the extensions on the Trays And Docu- Document Table and trays. ment Table Attach the Print Delivery Tray. Insert it at an angle so that the tabs fit in the slots pro- vided.
  • Page 5 Connecting up Connecting the Initial Settings & to the Tel- Power and Adjustments Switching on ephone Line Before using the machine, please adjust the fol- Insert the line cable into the socket labeled Insert the power cable into the socket lowing settings: “ISDN”.
  • Page 6 Enter your phone number. Enter your office, company, or personal Press the [Yes] key then the [Function] key. name, or any other appropriate identification. “PROGRAMMED” will flash on the display. Note TThe format of the number is normally as ABC Y/N READY 100% 10:00 follows: International Dial Prefix, Your Country...
  • Page 7: Setting The Date

    Setting the Date Changing the Paper & Time Size Settings Press the [Function] key and [6], enter the When you change the paper size loaded in the access code [2][2][2][2], then enter [9][1]. main cassette, optional second cassette or op- tional Multi-purpose Feeder, you need to change Y/NEXT V ADJUSTMENT...
  • Page 8 That’s it! EE GB H548-8671...