Ricoh FAX2000L Service Manual page 191

30 November, 1999
Code Meaning
6-11 G3 ECM - printing
impossible because of a
missing first line in the
MMR coding
6-21 V.21 flag detected during
high speed modem
communication
6-99 V.21 signal not stopped
within 6 seconds
9-07 Paper jam at the cassette
entrance
9-08 Paper jam inside the
development area
9-09 Paper jam in the fusing exit
area
9-10 Toner end detected
9-12 Cover open detected
during printing
9-20 Laser diode failure
9-22 Fusing lamp failure
9-23 Hexagonal mirror motor
failure
9-29 Power pack failure
9-50 Optional cassette - paper
non-feed
9-51 Optional cassette - paper
jam at the cassette
entrance
9-60 Printer error occurs during
reception
9-61 Memory overflow occurs
during reception
9-84 Standard cassette – paper
non-feed
Suggested Cause/Action
Check for problems in the printer mechanism.
The other terminal may be defective or
incompatible.
Replace the FCU.
If the problem persists, replace the FCU.
Cross-reference
Paper non-feed - Section 7-2-2
Jam at the cassette entrance – Section 7-2-2
If the problem persists, replace the FCU.
Cross-reference
Paper jam - Section 7-2-2
If the problem persists, replace the FCU.
Cross-reference
Paper jam - Section 7-2-2
Replace the cartridge.
Close the cover, or check the cover sensors.
If the problem persists, replace the FCU or
LDDR.
If the problem persists, replace the FCU, fusing
lamp, thermistor, or PSU.
If the problem persists, replace the FCU or
polygonal mirror motor.
If the problem persists, replace the power pack
or PSU.
Check the paper feed mechanism and sensors.
Cross-reference
Printer mechanical problems - Section 7-2-2
Check the paper feed mechanism and sensors.
Cross-reference
Printer mechanical problems - Section 7-2-2
If substitute reception is switched off and a
paper jam or other printer error occurs, the
machine will terminate the reception.
Check the printer mechanism.
Check the SAF.
Check the paper feed mechanism and sensors.
Cross-reference
Paper jam - Section 7-2-2
7-33
ERROR CODES