Table of Contents
Advertisement
SERVICE RAM ADDRESSES
8000AD(H) - User parameter switch 13
Bits 0 and 1: PSTN access method from behind PABX
Bit
1
0
0
0
0
1
1
0
1
1
Bits 2 to 7: Not used
8000B9(H) - User function 62 settings
Bit 0: Night timer
Bits 1 to 3: Not used
Bit 4: RDS operation
Bits 5 and 6: Not used
Bit 7: Daylight saving time
8000BA(H) - User function 62 setting
Bit 0: Not used
Bit 1: Dialing type
Bits 2 to 7: Not used
8000BB(H) - PSTN access number for loop start
Access number
0
Ø
0
00
Ø
99
8000BC(H) - User function 61 setting
Bits 0 to 7: The number of rings when auto mode is selected
8000BF(H) - User function 62 setting
Bit 0 to 7: Not used, do not change the setting.
8000C8 to 8000DB(H) - RTI (Max. 20 characters - ASCII) - Note 1
8000DC to 8000EF(H) - CSI (Max. 20 characters - ASCII)
8000F0 to 80010F(H) - TTI (Max. 32 characters - ASCII) - Note 1
800110(H) - Number of CSI characters (Hex)
Note 1: If the number of characters are less than the maximum (20 for RTI, 32 for
TTI), add a stop code (FF[H]) after the last character.
800111 to 80011F(H) - Service station's fax number (Service function 13)
800120 to 80012E(H) - Own fax number (User function 61)
800131(H) - Confidential ID (low - BCD)
800132(H) - Confidential ID (high - BCD)
Setting
PSTN
Loop start
Ground start (Europe & Asia model only, excluding France
models)
Flash start (Europe & Asia model only)
0: Disabled, 1: Enabled
0: Not acceptable
1: Acceptable for the limit specified by system switch 03
0: Disabled, 1: Enabled
0: Pulse dialing (10 PPS), 1: Tone (DTMF) dialing
Hex value to program (BCD)
F0
Ø
F0
00
Ø
99
4-52
30 November, 1999
0-99 (BCD)
Advertisement
Table of Contents
