Ricoh FAX2000L Service Manual page 84

Hide thumbs Also See for FAX2000L:
Table of Contents

Advertisement

30 November, 1999
System Switch 05
No
FUNCTION
0-1 Not used
2
Display of both RTI and CSI
on the LCD
0: Disabled 1: Enabled
3-7 Not used
System Switch 06
No
FUNCTION
0
Use of the Stop key during
memory transmission
0: Disabled 1: Enabled
1-3 Not used
4
Use of the Stop key during
memory transmission
0: Disabled 1: Enabled
5-7 Not used
System Switch 07 - Not used (do not change any of these settings)
System Switch 08 - Not used (do not change any of these settings)
System Switch 09
No
FUNCTION
0
Not used
1
Inclusion of communications in
the Journal when no image
data was exchanged.
0: Disabled 1: Enabled
2
Automatic error report printout
0: Disabled 1: Enabled
3
Print error code on error report
0: No 1: Yes
4
Listing of Confidential IDs on
the Personal Code List
0: Disabled 1: Enabled
5
Power failure report
0: Disabled 1: Enabled
COMMENTS
Do not change these settings.
1: Both RTI and CSI will be displayed alternately
on the LCD.
Do not change these settings.
COMMENTS
1: The Stop key can be used to halt memory
transmissions. However, users might
accidentally cancel another person's memory
transmission in progress.
Do not change these settings.
1: The Stop key can be used to halt memory
transmissions. After pressing the Stop key, a
message (STOP & CLR FILE?) appears on the
LCD.
Do not change these settings.
COMMENTS
Do not change this setting.
0: The Journal lists communications that
reached phase C (message TX/RX) of the T.30
protocol.
1: The Journal lists communications that
reached phase A (call setup) of T.30 protocol.
This includes telephone calls.
0: Error reports are not printed.
1: Error reports will print automatically after all
failed communications, excluding polling
reception and immediate transmissions.
1: Error codes are printed on the error reports.
1: Confidential IDs registered with Personal
Codes by the users will appear on the Personal
Code List.
1: A power failure report automatically prints
after the power is switched on if a fax message
disappears from memory when the power was
turned off last.
4-17
BIT SWITCHES

Advertisement

Table of Contents
loading

Table of Contents