Table of Contents
Advertisement
BIT SWITCHES
G3 Switch 0C
FUNCTION
0
Pulse dialing method
Bit 1 Bit 0 Setting
1
0
0
0
1
1
0
1
1
2
Not used
3
Ring detection method
0: Ringing
1: CNG (Germany only)
4-7 Not used
G3 Switch 0D - Not used (do not change these settings)
G3 Switch 0E - Not used (do not change these settings)
G3 Switch 0F - Not used (do not change these settings)
Normal (P=N)
Oslo (P=10 - N)
Sweden (N+1)
Not used
COMMENTS
P = Number of pulses sent out, N = Number
dialed.
Do not change these settings.
0: The machine starts to look for CNG as soon
as it detects off hook in auto reception mode.
1: The machine starts to look for CNG as soon
as it detects ringing in auto reception mode.
Note: This bit should be set to "1" only in
Germany.
Do not change these settings.
4-36
30 November, 1999
Advertisement
Table of Contents
