Ethernet Diagnostics - Mitsubishi MELSEC-F User Manual

11 TROUBLESHOOTING

11.2.2 Ethernet diagnostics

No. Item
1 Change IP address display
Selection from the various
2
information monitors
PING test
3
COM. ERR off
4
Start monitor
5
Stop monitor
6
Clear history
7
11 - 9
[Purpose]
The block status of an Ethernet module, parameter settings, communication status,
error log and others can be checked using the Ethernet diagnostic function of FX
Configurator-EN.
[Operating procedure]
FX Configurator-EN
[Ethernet diagnostics screen]
7)
3)
4)
5)
6)
[Explanation of items]
Switches the IP address display between decimal and hexadecimal.
Various types of information for the Ethernet module can be monitored.
(See Section 11.2.1 for the buffer memory corresponding to the display contents.)
Performs the PING test on the external device. (See Section 5.4.1, Section 5.4.2.)
Clicking this button turns the [COM.ERR] LED off. (See Section 11.1.2.)
Clicking this button executes the Ethernet diagnostics.
The display is updated during monitoring.
Clicking this button stops the Ethernet diagnostics.
The display is retained while monitoring is stopped.
Clears the log.
Diagnostics Diagnostics
Description
MELSEC-F
1)
2)
Setting range
Decimal/hexadecimal
—
11 - 9