Mitsubishi MELSEC-F User Manual page 243

11 TROUBLESHOOTING
11 - 18
6) Sending error log write pointer (BFM#23360)
• This address stores the error log block area number where the latest
sending error logging is registered.
0
1 or more : Error log block number where the latest sending error
If the pointer value is "8", it means that the latest error logging is
registered in the sending error log block 8 area.
• When 9 or more sending errors occur, the registration of sending
error logging starts from sending error log block 1 area again.
POINT
The sending error log block area consists of eight error log blocks that have the
same order of data items.
7) Error log block – Error code (BFM#23361 onwards)
• This block stores the error codes that indicate the contents of errors.
(See Section 11.4.)
8) Error log block – Command code (BFM#23362 onwards)
• This block stores the system command codes for the error causing
messages.
9) Error log block – To (BFM#23363 onwards)
• This block stores eight words from the beginning of the sending
source mail address of an error causing e-mail during
communication with the mail server, in ASCII code characters.
(Example)
If the sending source mail address was
"use@from.add.sample.co.jp",
"use@from.add.sam" is stored as ASCII code characters.
10) Error log block – Date (BFM#23371 onwards)
• This block stores the time and date on which the e-mail is sent in
BCD code.
• The order of date and time to be stored is the same as for the date
and time of e-mail reception shown in (a) 11).
11) Error log block – Subject (BFM#23375 onwards)
• This block stores 15 words from the beginning of the Subject of the
e-mail.
: No error. (No registration of sending error log)
logging is registered
MELSEC-F
11 - 18