10 USING THE E-MAIL FUNCTION
10 - 16
(3) Receiving with a personal computer
The following explains how a PC/UNIX receives e-mails sent from the Ethernet
module.
After setting an environment for using the Internet with application software that
processes e-mails, e-mails can be received on a receive message screen as
shown below.
(Example) The following shows an example of the received e-mail. (The screen
display shows Microsoft
Mail address of Ethernet module
Mail address of external device
<Data contents for attached files>
123456789abc
(a) From
Displays the mail address of the Ethernet module.
NOTE
By entering the mail addresses of the send destination devices in the address book,
the registered names (display names) can be displayed and makes management
easier.
(b) Subject
This indicates the transmission destination No. ( 1) and the Subject
written by a sequence program.
1 The Ethernet module automatically adds this number, sequentially
starting from 1.
( After the maximum number (99999) is reached, the number starts
again from 0.)
(c) Attached file
This indicates the name of the attached file sent by the Ethernet module.
POINT
Data in the attached file in CSV format can be read in cell units in Excel, etc., for
each word of data.
®
Corporation's Outlook Express 6.)
(a)
(b)
(c)
MELSEC-F
10 - 16