About The Generic Terms And Abbreviations - Mitsubishi MELSEC-F User Manual

About the Generic Terms and Abbreviations

Generic Term/Abbreviation
Ethernet Address
Ethernet module
Ethernet network
GX Developer
External device
Personal computer
Main unit
FX Configurator-EN
(GX Developer)
A - 14
This manual uses the following generic terms and abbreviations to describe the
Model FX -ENET Ethernet interface block.
3U
A machine-specific address that is also referred to as the MAC (Media Access Control
Address). This is used to identify the addresses of external devices over a network.
The Ethernet address of the Ethernet module can be verified on the MAC ADD
column of the rating plate.
Abbreviation for the FX
(Described as the Ethernet module or FX
Abbreviation for 10BASE-T and 100BASE-TX networks
Abbreviation for GX Developer (SWnD5C-GPPW-E). (n in the model name is 4 or later)
Generic term for personal computers, computers, workstations (WS) and Ethernet
module etc. that are connected by Ethernet for data communication
Generic term for an IBM PC/AT (or IBM compatible) personal computer
Generic name for FX Series PLC main unit
Software for setting the Ethernet module parameters. The software is described in
"
this manual as
both independently as well as from the [Tools] menu in GX Developer.
Description
-ENET Ethernet Interface block
3U
FX Configurator-EN (GX Developer)
-ENET in the figures)
3U
"
because it can be launched
A - 14