Mitsubishi MELSEC-F User Manual page 214

10 USING THE E-MAIL FUNCTION
10 - 15
1 Specify the attached file format by writing a parameter in BFM#10338 before
sending e-mail.
0000H: Sends the attached file in binary format
0001H: Sends the attached file in ASCII format
0002H: Sends the attached file in CSV format
0004H: Sends the attached file as a text mail
(a) Designate binary format when communicating between Ethernet modules.
The name of the attached file is mmddhhss.bin (system date.bin).
mm: Month
(b) Designate either binary format, ASCII format or CSV format when a PC/UNIX
receives e-mail sent from an Ethernet module.
1) When binary format is designated
The name of the attached file is mmddhhss.bin (system date.bin).
mm: month
2) When ASCII format is designated
The name of the attached file is mmddhhss.asc (system date.asc).
mm: month
3) When CSV format is designated
The name of the attached file is mmddhhss.csv (system date.csv).
mm: month
For details on how to receive e-mails, see (3).
The system date for the file name is the data managed by the PLC in
which the Ethernet module is installed.
dd: Date hh: Hour ss: minute
dd: day hh: hour
dd: day hh: hour
dd: day hh: hour
MELSEC-F
ss: minute
ss: minute
ss: minute
10 - 15