Mitsubishi MELSEC-F User Manual page 21

1 OVERVIEW
Local station
1 - 5
(4) Connecting FX Configurator-EN (Details are explained in the
Operating Manuals for FX Configurator-EN)
(a) Simplifying sequence programs using FX Configurator-EN (GX Developer)
FX Configurator-EN (GX Developer) supports the parameter setting
function to perform the Ethernet module initialization and the open
processing with external devices. By setting up the following parameters
with FX Configurator-EN (GX Developer), access is enabled from the
external device to the PLC. It can also simplify sequence programs used to
perform communication by Ethernet modules.
• IP address setting
• Port number setting
• Protocol type setting
For more information on setting up the Ethernet module, see Section 3.5,
"List of Setting Items for Ethernet Modules" and other applicable reference
sections.
Parameter setting
Ethernet
Serial communication
• E-mail settings
• Each timer setting
External device
FX configurator-EN
(GX Developer)
MELSEC-F
External device
1 - 5