8 COMMUNICATION USING MC PROTOCOL
(2) Remote control of the PLC
Communication using A compatible 1E frames
Communication using MC
protocol
Device memory read/write
Status control of the PLC (remote RUN/STOP, etc.)
8 - 2
This function executes remote RUN/STOP operations.
Remote operations of the PLC can be performed from the external device side.
1 Time required for communication in binary code is shorter because the amount of
the communication data is approximately a half of what is required for
communication in ASCII code data.
Function
Batch read/write in bit/word units
MELSEC-F
Communication using ASCII code
Communication using binary code *1
8 - 2
8