Mitsubishi MELSEC-F User Manual page 51

3 SPECIFICATIONS
BFM number
Attribute Application
Decimal
(Hexadecimal)
10333 Mail sending
R/W
(285DH) command
10334 Mail sending
R
(285EH) status
10335 Error codes at
R
(285FH) sending e-mail
10336 Sending result
R
(2860H) of e-mail
Sending
10337
R/W designation of
(2861H)
e-mail
10338 Attached file
R/W
(2862H) format
10339 to 10402
R/W Subject
(2863 to 28A2H)
10403 Word count of
R/W
(28A3H) attached file
10404 to 12451 Main text of
R/W
(28A4 to 30A3H) attached file
12452 to 14499
System area
(30A4 to 38A3H)
*1 (example)192, 168, 0, 10
3 - 23
• Write value
Mail sending instruction (0001H)
• Read value
Returns to "0000H" when mail sending commences
Multiple requesting exists.
Initial status (0000H)
Mail sending normally completed (0001H)
Mail sending abnormally completed (0002H)
While mail being sent (8000H)
When sending mail to a single address, depending on the send (BFM
#10333: 0001H), the memory is cleared and the first error code found
is stored. When sending mail to multiple addresses, the first error code
found is stored, even after errors. "
The second error and later errors are not stored.
Send destination address 1
Send destination address 10 Success (b9: ON) / Failure (b9: OFF)
Turns on the bit of the mail address that sends an e-mail.
Sending destination address 1
Sending destination address 10 Enable (b9: ON) / Disable (b9: OFF)
Initialized into 0000H by mail sending instruction, and the bit is updated
sequentially depending on the sending result.
0000H: Sends the attached file in binary format (maximum 2048
words)
0001H: Sends the attached file in ASCII format (maximum 2048 words)
0002H: Sends the attached file in CSV format (maximum 2048 words)
0004H: Sends the attached file as a text mail (maximum 256 words)
Stores a subject (maximum 128 words)
Designates the word count of main text (0 to 256)/attached file (0 to
2048)
Stores a main text or an attached file
C0
4)
H
BFM 9922 2)
BFM 9923 4)
Name
Success (b0: ON) / Failure (b0: OFF)
to
Enable (b0: ON) / Disable (b0: OFF)
to
A8 00 0A
3) 2) 1)
L
1)
3)
MELSEC-F
(Continued from the previous page)
Reference
Initial value
Flash ROM
section
Decimal
save
(Hexadecimal)
0
Chapter 10
(0000 )
H
0
Chapter 10
(0000 )
H
0
Chapter 10
(0000 )
H
0
Chapter 10
(0000 )
H
0
Chapter 10
(0000 )
H
0
Chapter 10
(0000 )
H
\0
0
(0000 )
H
\0
3 - 23