Load Font Index - Ricoh SP 4510DN User Manual

10. Loaded Font Command Set

Load Font Index

This command is 32 + (256 × 16) (the (256 × 16) byte field is not always required) bytes long. It
contains general information needed to print the patterns and a description of the characteristics of each
of the 256 possible code points. Each font can have from one to four associated font indices.
Each index is loaded by a separate Load Font Index command. This command can only be issued in
Home State.
Offset Range
0-1 X'0001'-
X'7EFF'
2
X'00'
X'41'-X'FE'
3
Bit 0: 0/1
Bits 1-7:
0000000
4-5
X'0000'
X'2D00'
X'5A00'
X'8700'
6-7 X'0000'
8-9 X'8000' -
X'7FFF'
10-11 X'8000' -
X'7FFF'
12-13 X'0000'
208
FONT HOST ASSIGNED ID (HAID)
SECTION ID
Single byte
Double-byte section
FLAGS
VARIABLE SPACE: Disabled/Enabled
Reserved
FONT INLINE SEQUENCE
0 degrees
90 degrees
180 degrees
270 degrees
Reserved
UNIFORM or MAXIMUM BASELINE OFFSET
UNIFORM or MAXIMUM CHARACTER INCREMENT
Reserved
Meaning Error Code
X'0218..0
2'
X'0243..0
2'
X'0240..0
2'
X'0246..0
2'
X'023C..
02'
X'023C..
02'