1. Device Control Command Set
XOA Request Resource List
This order causes the Resource List (See "Resource List Reply") to be placed in the Special Data Area of
the Acknowledge Reply (See page 10 "Acknowledgement Reply") requested with this order. If the ARQ
flag was not set for this XOA subcommand, it is treated as a NOP.
A Resource List Reply may consist of multiple entries. If the Resource List Reply contains an entry that
does not fit in the space available in the Special Data Area of Acknowledge Reply, the printer will
follow either the acknowledge continuation method or the RRL-continuation method, depending on the
host, as described in Intelligent Printer Data Stream Reference.
Offset
Range
0-1
X'F400'
2
X'05'
X'00' or
X'FF'
3-4
X'0000'-
X'FFFF'
5
X'03'-X'xx'
64
REQUEST RESOURCE LIST (RRL)
QUERY TYPE
Resource Activation Status
General Resource Status
ENTRY CONTINUATION Indicator
ENTRY LENGTH
Multiple-entry queries are not supported. Byte 5 indicates the
length of the command.
Meaning
Error Code
X'0291..0
2'
X'0291..0
2'