Ricoh SP 4510DN User Manual page 767

Offset Range
9-10 FGID
X'0000' No value assigned (Note 2)
X'0001' - Font Global ID
X'FFFE'
X'FFFF' Printer Default (Configuration Setting)
11-12 FW
X'0000' No value assigned (Note 2)
X'0001' - Font Width (Ignored for Fixed Pitch Fonts)
X'7FFF'
X'FFFF' Printer Default as specified by Configuration Settings
13 X'00' Reserved
14 FONT ATTRIBUTES (Note 3)
Bit 0 0/1 Ignored (Symbol Sets)
Bits 1-2 00 Reserved
Bit 3 0/1 Ignored (Double High)
Bit 4 0/1 Ignored (Italics)
Bit 5 0/1 Ignored (Double Strike)
Bit 6 0/1 Bold = 1
Bit 7 0/1 Ignored (Double Wide)
15 X'00' Reserved
16-n Additional LFE ENTRIES
• For LF1 coded fonts, FIS specifies the font index table for character rotation. For LF3 coded fonts,
FIS is used to select the metrics for a specific writing mode.
• Global Resource IDs (bytes 5-12) apply to printer resident fonts only. If these fields are all X'0000',
then an activation is not done. If GCSGID and/or FW are 0 or X'FFFF':
Meaning
Load Font Equivalence
Error Code
X'021D..
02'
X'023A..
02'
37