Specifying Log Encryption - Ricoh SP 4510DN User Manual

7. Managing the Printer
3. Click [Logs] under "Device Settings".
4. Select [Active] for each function: "Collect Job Logs", "Collect Access Logs" and "Collect
Eco-friendly Logs".
5. Specify the collection level for each function, "Job Log Collect Level", "Access Log Collect
Level", and "Eco-friendly Log Collect Level".
When a level is changed, the selection status of log details changes according to the level.
To change individual items of the log details, configure the setting for each item. Even if the
collection level is set to [Level 1] or [Level 2], once individual items of the log details are changed,
the level changes to [User Settings].
6. Click [OK].
7. "Updating..." appears. Wait for about one or two minutes, and then click [OK].
If the previous screen does not reappear after you click [OK], wait for a while, and then click the
web browser's refresh button.
8. Log out.
• The greater "Access Log Collect Level" setting value, the more logs are collected.

Specifying Log Encryption

Use the following procedure to enable/disable log encryption.
1. Log in as the machine administrator from Web Image Monitor.
2. Point to [Device Management], and then click [Configuration].
3. Click [Logs] under "Device Settings".
4. Select [Active] under "Encrypt Logs".
To disable log encryption, select [Inactive].
5. Click [OK].
A confirmation message appears.
6. Click [OK].
7. Log out.
• To encrypt the logs, it is necessary to set the collection setting to active for job log, access log, or
eco-friendly log.
• If the data stored in the printer has been encrypted, the log files will still be encrypted, regardless of
this setting.
196